Evaluate the product’s dimensions, grip, reach, and handling.
PROTOTYPING & TESTING
Build Your Prototype.
See How Your Product Works.
Turn your product design into a physical prototype you can hold, use, and evaluate.
We help you plan the build, test the features that matter, and identify improvements before moving further toward production.
Take the Product Blueprint assessment to see whether prototyping is your next step.
INSPECTION BENCHSIZE · FIT · FUNCTION
- 01OUTSIDE WIDTH84.00PASS
- 02SEAM CLEARANCE0.40FAIL
- 03LID TRAVEL30°PASS
- 04PIN AND BOREØ12.0PASS
Dimensions, grip and reach get judged on the part. A model on a screen cannot tell you how it sits in a hand.
The blade enters at rest and is pinched under hand load. An interference recorded here is a change made before the next build.
Swept through the full stroke under the agreed test conditions, and observed rather than assumed from the model.
How the components connect, and where assembly gets difficult. Judged on the parts in hand, not inferred from the model.
PUT YOUR DESIGN TO THE TEST
Find Out What Works
Before You Build More.
A physical prototype helps you evaluate details that are difficult to judge on a screen. Use it to examine how your product feels, fits together, and performs its intended task.
See whether the mechanism or feature you’re developing works as intended under the agreed test conditions.
Check how components connect, where interference occurs, and what makes assembly difficult.
Use observations from the build and testing to prioritize design changes.
WHAT YOU WALK AWAY WITH
A Physical Prototype
and Clear Findings.
Your project scope defines what we build, what we evaluate, and what you receive. Depending on the project, deliverables may include:
- A Prototype Build Plan
A defined purpose for the prototype, the features included, and the questions it should help answer.
- The Physical Prototype
A model or working build suited to the agreed development stage and evaluation needs. It transfers to you.
- An Evaluation Plan
The checks, test conditions, and observations used to assess the selected features.
- Documented Findings
A record of what was observed, including issues, limitations, and features that need further work.
- Recommended Design Changes
A prioritized set of improvements to consider before the next build.
- A Next‑Step Recommendation
Guidance on whether to revise the design, run another test, or prepare for the next development stage.
CHOOSE THE BUILD THAT FITS THE QUESTION
What Does Your Prototype
Need to Show?
The right prototype depends on what you need to learn. Some projects need a simple physical model. Others need a working mechanism or a more complete assembly.
Evaluate the product’s shape, proportions, and how it feels in someone’s hands.
Explore whether a core mechanism or technical approach can work.
Test selected features and observe how the product performs its intended task.
Bring components together to evaluate fit, assembly, and how the systems interact.
We help define the appropriate build for your current question. More detail is useful when it supports a specific decision.
HOW THE PROJECT WORKS
Plan the Build. Test It.
Decide What Comes Next.
- 01Define What We Need to Learn
Review your design, development progress, and the questions that matter most. Agree on the prototype’s purpose and scope.
- 02Choose the Build Approach
Select an appropriate approach based on the required function, materials, components, budget, and available fabrication methods.
- 03Build and Evaluate
Create the agreed prototype and assess the selected features. Document observations and any limitations affecting the findings.
- 04Review the Findings
Walk through what worked, what needs attention, and which changes deserve priority.
- 05Set the Next Step
Decide whether the project needs design revisions, another prototype, additional testing, or preparation for supplier review.
Any additional builds or design work should be scoped and approved before proceeding.
PLAN YOUR PROTOTYPE BUDGET
Know What Goes
Into the Build.
Prototype cost depends on what needs to be made and what it needs to demonstrate. We define those requirements before setting the scope.
The number of components, their geometry, and how they fit together affect fabrication and assembly work.
Material requirements, finish, and fabrication methods influence cost and lead time.
Wiring, controls, mechanisms, and integration can add development work.
The evaluation required and the number of agreed build cycles affect the overall scope.
Your project scope should identify the included build, evaluation work, deliverables, and how additional revisions will be handled.
PRACTICAL PRODUCT DEVELOPMENT EXPERIENCE
Built With the Next
Version in Mind.
Product Blueprint Academy was founded by mechanical engineer, inventor, and entrepreneur Frank DeLuca.
Our approach connects prototype work to the decisions that follow: what to change, what to test again, and what needs further development before manufacturing.
Each build should help you understand your product better and make a more informed decision about where to invest next.
Evaluate the features that matter to the product’s intended use.
Make the observations useful for the next design revision.
Keep assembly, manufacturing, and further testing needs in view.
QUESTIONS ABOUT PROTOTYPING
Before Your
First Build.
Do I need CAD files before you build my prototype?+
Not always. Some builds require detailed CAD files, and others can begin with simpler information. We review what you have and identify any design work needed before fabrication.
Can you work with a prototype I already have?+
Yes. An existing prototype can help establish the starting point. Share what it does, what isn’t working, and any supporting design files so the next scope can be assessed.
Do I need a patent before I make a prototype?+
It depends on your product and circumstances. Our IP Strategy & Protection service helps you identify the questions to resolve and whether specialist IP advice should be an early priority. We don’t give legal advice. Legal opinions and filing advice should come from a qualified IP professional.
Will my prototype look like the finished product?+
It depends on its purpose. A model made to evaluate appearance may look close to the intended product. A build made to test a mechanism may use temporary materials or exposed components.
What if my prototype doesn’t work as expected?+
The findings help identify what needs to change. We review the observations and recommend a next step. Further design work or another build may require an additional scope.
Are revisions and extra builds included?+
CAD revisions are included. Your project scope defines the included review and revision work, and any additional builds should be agreed before proceeding.
Does a working prototype mean I’m ready for manufacturing?+
Not necessarily. The design may still need refinement, production material selection, supplier review, or additional testing before manufacturing.
Can I use my prototype for demonstrations or crowdfunding, like Kickstarter?+
Tell us how you intend to use it before the project is scoped. A prototype built for internal testing may need different features, appearance, or durability than one used in a public demonstration.
How much does a prototype cost, and how long does it take?+
It depends on complexity, materials, fabrication methods, components, and evaluation requirements. Cost and timing are set after we review the project, and we don’t publish prices.
AFTER THE BUILD
Know What’s Ready and
What Still Needs Work.
The prototype review brings the findings together so you can decide how to move forward.
- What Worked→
The functions and features demonstrated under the agreed evaluation conditions.
- What Needs to Change→
Issues with fit, function, materials, assembly, or usability that deserve attention.
- What Remains Untested→
Questions that require further builds, different conditions, or specialist evaluation.
- What Comes Next→
The recommended design, testing, or supplier preparation work for the next stage.
Prototype evaluation covers the agreed scope. Certification, regulatory testing, and production validation should be identified and scoped separately where needed.
TAKE THE NEXT STEP
Ready to Put Your Product
Design to the Test?
Find your product’s stage and see what kind of prototype work makes sense next.
START MY ASSESSMENT →Start with the Product Blueprint assessment.
Education and done-for-you services. No guarantee of funding, manufacturing, launch, or sales outcomes.